KERUI Printed Circuit Board(PCB) Recycling
Introduction of KERUI Printed Circuit Board(PCB) Recycling
Since 2012, our company started developing the dry type PCB recycling machine. With the years of practical experience, our newly upgraded plant can recycle almost all kinds of the PCB scraps with high recovery and pure finish products.
According to the material&structure features of the PCB, we use shredder, crusher and grinder to process the PCB scraps to get the fine mixed powder, then use the air separator and high voltage electrostatic separator to extract the metal from the non-metal material with high recovery and purity of the finish product is over 98%.
Working Principle of PCB recycling
1.Feed the material into the shredder by belt conveyor to chop the material into small pieces with size less than 20mm.This step is used to reduce the size of the raw material and increase the processing capacity of the following equipment.
2.Feed the chopped material into the pulverizer by belt conveyor to crush the material into small granules with size less than 8mm.This step is used to break the construction of the material through the multi-point breaking of the flying blades.
3.Feed the crushed material into the grinder by air conveyor to grind the material into powder with finesse less than 20mesh
4.Feed the grind material into the two-step zig-zag separator to separate out the supper fine resin powder from the metal mixture. This step is used to reduce the negative effects of the super fine resin powder to the high voltage electrostatic separation.
5.Feed the metal mixture into the air separator by wind conveyor to separate out the metals from the resin.
6.Feed the outlet resin of the air separator to the high voltage electrostatic separator to extract the fine metal powder.This step is used to increase the purity of the outlet resin.
Features of KERUI Printed Circuit Board(PCB) recycling System
1.The whole process is under the negative pressure and all of the dust will be sucked by impulse dust collection devices.
2.By adding the zig-zag separator to the production line to classify the outlet resin, the total economic value of finish products can be increase 3-5%.
3.This line can process most kinds of the PCB with high purity of the outlet material.
4.With the high degree of automation, the manpower is much reduced.
Video of Printed Circuit Board(PCB) Recycling
Pre sale service:
1. We can recommend the proper proposal accordingly to meet customer’s request then help customer to choose the proper equipment.
2. Provide the detailed technical parameter of each equipment.
3. Free technical advice.
4. Introduce the relative equipment.
1. Report customer the working condition of the order regularly.
2. Pack the machine in export standard.
3. Notice the shipping date in advance.
After sales service
1.Installation&operation: We will guide the user to install the machine on line and help the user to adjust the machine when user changes the raw material. We will inquire user to learn the working condition of the machine regularly and give advice till the user totally know the machine.
2.Warranty: 100% brand new when leaving the factory. we guarantee quality of the machines for a period of one year from the date of a trial run to the finish, but not to exceed thirteen months from the date of which machines away to the delivery port. If any parts (excluding easily damaging parts) are found defective in quality in the first year, the seller should replace free-of-cost. After one year, parts can be replaced on favorable payment basis.
3.Long time free technical support.