KRWCG Services Wet Type Copper Wire Granulation Machine

KRWCG Services Wet Type Copper Wire Granulation Machine

KRWCG-10W wet type cable granulation machine is in compact structure, it includes crusher, wave table, water circulation system and plastic filtration device.

Technical Features of KRWCG Services Wet Type Copper Wire Granulation Machine

1. High recovery rate
2. Lower power consumption
3. Low space taken
4. Easy to operate
5. Single or three phase power supply
6. Low noise

Introduction of KRWCG Services Wet Type Copper Wire Granulation Machine

KR400 Crusher
The blades’ structure is designed to chop copper wires, it can chop the wires with lower blades damage, the chopped granules are in uniform and the cutting section of the granules is flat and smooth then it will guarantee the separation performance of the hydro separator. Also, the crusher has material striker plate to prevent material jumping out during the process.
Hydro separator
It’s used to separate the high density(>1) material from the lower one(<1) due to the higher one will sink in the water and the lighter one will float on the water. After starting the vibration and water flashing in opposite direction, the high density material will move towards to the direction of the vibration and the lower one will be flashed to opposite direction.
The material of the vibration bed is made of #304 stainless steel and it’s bed surface is covered with a special PVC sheet to increase the friction to guarantee the separation performance.
The vibration movement is driven by the crank and rocker mechanism to keep the stabilization.
Water circulation system and plastic filtration device
The water circulation system can keep most of the metal particle within the system to reduce the production loose. Also, the flashing water take both of the plastic granules and metals particles to the filtration device and the plastic will not get through the sieve due to the over size and the metal particle will sink down to the bottom of the water tank. After a period of time, the metal mud can be cleaned out for sale.

Technical Parameters of KRWCG-10 Wet Type Copper Wire Granulation Machine

Copper recovery rate
99.8%
Processing ability
<25mm
Dimension
2700mm*1400mm*1800mm
Weight
800kg
Motor Power
8.15kw(7.5kw+0.4kw+0.25kw)
10 hours production
1000kg-2000kg

Technical Parameters of KRWCG-20 Wet Type Copper Wire Granulation Machine

Copper recovery rate
99.8%
Processing ability
<25mm
Dimension
3200mm*2900mm*2300mm
Weight
2000kg
Motor Power
17.8kw
10 hours production
1500kg-3000kg
KRWCG Services Wet Type Copper Wire Granulation Machine

Technical Parameters of KRWCG-40 Wet Type Copper Wire Granulation Machine

Copper recovery rate
99.8%
Processing ability
<30mm
Dimension
3300mm*3200mm*2300mm
Weight
2500kg
Motor Power
33.5kw
10 hours production
3000kg-6000kg

Optional Equipment of KRWCG-40 Wet Type Copper Wire Granulation Machine

Name
Power
Crusher
30kw
Pressurized Blower
2.2kw
Vibration Table
0.4kw
Dryer
0.4kw
Pump
0.5kw

Our Services

Pre sale service:
1. We can recommend the proper proposal accordingly to meet customer’s request then help customer to choose the proper equipment.
2. Provide the detailed technical parameter of each equipment.
3. Free technical advice.
4. Introduce the relative equipment.

On-purchase service:
1. Report customer the working condition of the order regularly.
2. Pack the machine in export standard.
3. Notice the shipping date in advance.

After sales service
1.Installation&operation: We will guide the user to install the machine on line and help the user to adjust the machine when user changes the raw material. We will inquire user to learn the working condition of the machine regularly and give advice till the user totally know the machine.
2.Warranty: 100% brand new when leaving the factory. we guarantee quality of the machines for a period of one year from the date of a trial run to the finish, but not to exceed thirteen months from the date of which machines away to the delivery port. If any parts (excluding easily damaging parts) are found defective in quality in the first year, the seller should replace free-of-cost. After one year, parts can be replaced on favorable payment basis.
3.Long time free technical support.

If you have any question, please click here for live help.

Request for Quotation

Please feel free to fill in the following form or email us (andywang@keruimachinery.com) to get product information,price,service and other supports.We will reply to you within 24 hours as soon as possible.Thank You!